Your question: How do you clean electrical equipment?

What should you do before cleaning electrical equipment?

Check that the electrical equipment is in good condition

  1. Switch off and unplug the equipment before you start any checks.
  2. Check that the plug is correctly wired (but only if you are competent to do so).
  3. Ensure the fuse is correctly rated by checking the equipment rating plate or instruction book.

What are the methods of cleaning equipment?

Equipment can be categorized with regard to cleaning method as follows:

  • Mechanical Cleaning. Often referred to as clean-in-place (CIP). …
  • Clean-out-of-Place (COP). Can be partially disassembled and cleaned in specialized COP pressure tanks.
  • Manual Cleaning. Requires total disassembly for cleaning and inspection.

How do you Sterilise electrical equipment?

As always, make sure you unplug any electronics before you clean them. Then spray a bit of bleach-free cleaning fluid onto a soft cloth and wipe down the surfaces of your consoles, controllers and cables. Use a slim brush or a toothpick to carefully nudge dirt out from around the buttons.

Can alcohol wipes be used on electronics?

99% alcohol wipes are regularly used in the production of electronic components, so they’re safe for keyboards and buttons. 70% presaturated alcohol wipes work well for disinfecting on the go.

THIS IS INTERESTING:  Is electric stove more expensive than gas?

Can Clorox wipes be used on electronics?

You can use 70% isopropyl alcohol or Clorox disinfecting wipes to clean the surface and screen of your watch. … They can be made from a variety of materials, such as leather, silicon, metal, and even fabric, and some cleaning supplies can be harmful to them.

What are the proper order in cleaning tools equipment and paraphernalia?

Use, care & maintenance of cleaning tools

  • Dry clean. Remove visible and gross soils and debris.
  • Pre-rinse. Rinse all areas and surfaces until they are visibly free of soil.
  • Wash (soap and scrub). …
  • Post-rinse. …
  • Inspect. …
  • Sanitize. …
  • Dry. …
  • Verification.

How do you safely use housekeeping electric equipment?

Electrical equipment should be maintained by trained individuals only. Never overload circuits; use surge protection power strips and Ground Fault Circuit Interrupters as needed. Properly ground all electrical equipment. Be sure that all cords are well placed, in good shape, and away from water.

What are the 5 cleaning equipment?

What is Cleaning equipment?

  • The use of cleaning equipment has evolved over the years. …
  • Commercial properties call for specialised cleaning equipment in order to quickly and efficiently clean large spaces. …
  • Wet Extractors. …
  • Hot-water extraction machines. …
  • Solvent extraction machines. …
  • Wet Vacuums. …
  • Rotary Floor Machines.

What are the 3 methods of cleaning?

The three most common cleaning and sanitising methods used in commercial kitchens are:

  • Manual.
  • Mechanical.
  • Clean-in-place.

What is the 7 step cleaning process?

The seven-step cleaning process includes emptying the trash; high dusting; sanitizing and spot cleaning; restocking supplies; cleaning the bathrooms; mopping the floors; and hand hygiene and inspection. Remove liners and reline all waste containers. Change the bag when ¾ full or if the area is closed for the day.

THIS IS INTERESTING:  Frequent question: Which of the following may a certificated airframe and powerplant mechanic perform on aircraft and approve for return to service?