Projects


Private Sector Projects


Customer: Winrock International India
Project:

1 MW electricity generation from MSW based biogas project

Country/location: India
Project description:

Conduct of feasibility study

Customer: ENVIMA (Thailand) Co., Ltd.
Project:

Training on “Reducing Carbon Footprints in Textile Industries”

Country/location: Thailand
Project description:

The project involves training on methods to reduce carbon footprint of a textile industry.

Customer: DRDO
Project:

Design, construct and commission of solar water heaters

Country/location: Pondicherry, India
Project description:

The project involves site visit, design, construction and commissioning of solar water heaters of domestic scale and industrial scale at various parts in Pondicherry

Customer: Earthwatts
Project:

10 MW biomass dendro power plant

Country/location: Sri Lanka
Project description:

Feasibility study, fuel supply assessment and project valuation for a 10 MW biomass dendro power plant in Srilanka.

Customer: Vidullanka Plcc
Project:

Municipal Solid Waste (MSW) based power plant project

Country/location: Sri Lanka
Project description:

Technical and financial due diligence for a 10 MW MSW power plant in Srilanka

Customer: AEP/PEA
Project:

Gasification projects

Country/location: Thailand
Project description:

The project involves development of PoA-DD, generic CPA-DD and specific CPA-DD for around 43 gasification power plant projects and support for validation until registration

Customer: Sugar mill in Tanzania
Project:

Feasibility study for sugar cogeneration system

Country/location: Tanzania
Project description:

The project involves conduct of feasibility study of cogeneration system in a sugar mill.

Customer: Four palm oil mills and ethanol plants in Thailand
Project:

Biogas power generation from four palm oil mills and ethanol plants

Country/location: Thailand
Project description:

The project involves CDM PDD development for biogas generation from waste water treatment in a palm oil mill.

Customer: Private Company in Sri Lanka
Project:

Fuel supply availability study and fuel risk assessment for a rice husk project

Country/location: Sri Lanka
Project description:

The project involves fuel supply availability study and fuel risk assessment for a rice husk/multi fuel biomass power plant in Srilanka.

Customer: A Sri Lankan company
Project:

Rice husk and wood waste based power plant project

Country/location: Sri Lanka
Project description:

Technical and financial due diligence and implementation strategy for a rice husk power plant in Sri Lanka.

Customer: AEP/PEA
Project:

Energy efficiency street lighting projects

Country/location: Thailand
Project description:

The project involves development of PoA-DD, generic CPA-DD and specific CPA-DD for street lighting energy efficiency improvement project and support for validation until registration.

Customer: AEP/PEA
Project:

Energy efficiency street lighting projects

Country/location: Thailand
Project description:

The project involves development of PoA-DD, generic CPA-DD and specific CPA-DD for street lighting energy efficiency improvement project and support for validation until registration.

Customer: Sugar mill in Tanzania
Project:

Feasibility study for biogas plant

Country/location: Tanzania
Project description:

The project involves feasibility study of biogas plant from ethanol wastewater.

Customer: AEP/Energy Absolute
Project:

8 MW solar power plant

Country/location: Thailand
Project description:

The project involves development of PDD for 8 MW solar power plant in Thailand.

Customer: AEP
Project:

Biogas from swine farm waste water

Country/location: Thailand
Project description:

The project involves development of PDD for biogas generation from swine farm wastewater in Thailand.

Customer: AEP
Project:

Biogas from swine farm waste water

Country/location: Thailand
Project description:

The project involves development of PDD for biogas generation from swine farm wastewater in Thailand.

Customer: Private Company
Project:

Study on Carbon Foot Printing approaches for selected industries

Country/location: Confidential
Project description:

The project involves study on carbon foot printing processes in various industrial sectors.

Customer: TMB-Energietechnik
Project:

720 kW biomass gasification power plant

Country/location: Nepal
Project description:

The project involves financial analysis, project due diligence, carbon trading potential assessment and assistance in contracting.

Customer: Relab Energy
Project:

Pre-feasibility study for 1 MW gasification power plant

Country/location: Thailand
Project description:

The project involves conduct of feasibility study for 1 MW gasification power plant in Thailand.

Customer: Private sector company
Project:

Power generation from biomass

Country/location: Canary Island
Project description:

Emission reduction potential assessment for a biomass power plant

Customer: Private sector company in Mauritius
Project:

Biogas power generation from waste water treatment facility

Country/location: Mauritius
Project description:

CDM potential assessment study

Customer: Private company
Project:

Renewable energy projects including biomass and hydro

Country/location: Ecuador
Project description:

Carbon finance and CER sales facilitation for CDM projects

Customer: Elgrey Power Pte Ltd
Project:

2 x 30 MW multi-biomass power plant

Country/location: Singapore
Project description:

The project involves conduct of feasibility study for 2×30 MW multi fuel biomass power plant in Singapore.

Customer: Agro based company in Pakistan
Project:

Electricity and steam generation using rice husk

Country/location: Pakistan
Project description:

CDM potential assessment study

Customer: For a multinational company’s African operation unit
Project:

10 MW wood waste fired power plant

Country/location: Africa
Project description:

Specific activities involved in this project includes:

  • Preparation of full feasibility study report
  • Preparation of detail specification of equipment and tender document preparation
  • Detail survey of nearby industries where biomass fuel is available
  • Preparation of fuel supply availability report
  • Study on centralized steam supply system to supply steam to various nearby customers
  • Preparation of various documents required for the financing of power plant and other projects
Customer: AEP/Thai Oil Power
Project:

Heat recovery from Gas turbine flue gas

Country/location: Thailand
Project description:

Study on assessment of CDM potential

Customer: Egypt based multinational company
Project:

10 MW rice straw fired power plant

Country/location: Egypt, Africa
Project description:

Preparation of project assessment report for a 10MW rice straw fired power plant

Customer: US Based project developer
Project:

15 MW coffee husk based power plant

Country/location: Uganda
Project description:

Technical and CDM assessment of a coffee husk project

Customer: MINERGY, Philippines
Project:

10 MW multi-fuel biomass power plant

Country/location: Philippines
Project description:

Specific activities involved in this project includes:

  • Project involves conduct of a full feasibility study report
  • Survey of various biomass fuel supplying industries
  • Study of energy plantation options, fuel pricing, contracting, transportation and storage options and risk assessment study
  • Strategic recommendation for different project implementation options
  • CER estimation
Customer: Agro based company in Pakistan
Project:

3.5 MW biomass based cogeneration plant

Country/location: Pakistan
Project description:

Feasibility study, CER estimation and strategic recommendation for biomass based cogeneration plant

Customer: REVONERGY INC., UK based company
Project:

30 MW MSW power plant

Country/location: Nigeria
Project description:

Feasibility study and CDM potential assessment for generation of electricity using MSW

Customer: Pakistan based private company
Project:

5 MW biomass cogeneration

Country/location: Pakistan
Project description:

Feasibility study report for biomass cogeneration project

Customer: AEP/EGAT
Project:

Energy efficiency improvement through retrofitting the turbines

Country/location: Thailand
Project description:

Preparation of CDM Project Design document

Customer: Pakistan based private company
Project:

8 MW biomass cogeneration

Country/location: Pakistan
Project description:

Pre-feasibility study report

Customer: Pakistan based private company
Project:

8 MW biomass cogeneration

Country/location: Pakistan
Project description:

Pre-feasibility study report

Customer: US Based project developer
Project:

15 MW coffee husk based power plant

Country/location: Uganda
Project description:

Technical and CDM assessment of a coffee husk project

Customer: REVONERGY INC., UK based company
Project:

5 MW biogas power generation from swine farm waste

Country/location: Spain
Project description:

Potential assessment study

Customer: REVONERGY INC., UK based company
Project:

30 MW MSW power plant

Country/location: Middle East
Project description:

Feasibility study for generation of electricity using MSW

Customer: Thailand based private company
Project:

Large scale wind farm

Country/location: Thailand
Project description:

Feasibility study for generation of electricity using wind turbines

Customer: Private company based in Thailand
Project:

CDM potential for a combined cycle project

Country/location: Vietnam
Project description:

Study on assessment of CDM potential

Customer: UK based company
Project:

2 MW cattle dung to electricity project

Country/location: South Africa
Project description:

Study on assessment of CDM potential

Customer: MGT & Co. Ltd
Project:

Biogas power generation from waste water treatment facility

Country/location: Mauritius
Project description:

Power generation potential assessment for waste water treatment plant

Customer: REVONERGY INC., UK based company
Project:

30 MW MSW power plant

Country/location: Africa
Project description:

Feasibility study for generation of electricity using MSW

Customer: A wood industry from Gabon
Project:

1.2 MW Power generation from wood waste

Country/location: Gabon
Project description:

Conduct of Feasibility study

Customer: A rice mill in India
Project:

Market study for rice husk ash

Country/location: India
Project description:

Market study for rice husk ash

Customer: Canadian based company
Project:

Large scale wind energy projects in Asia

Country/location: Pakistan, Sri Lanka
Project description:

CDM potential assessment study

Customer: AEP/KS Bio Plus
Project:

Wastewater treatment with biogas system in a starch plant for energy & environment conservation

Country/location: Thailand
Project description:

Preparation of CDM Project Design Document

Customer: AEP/Sima 3
Project:

4 MW biogas power plant from starch waste water

Country/location: Thailand
Project description:

Assistance from PDD development until registration for a biogas power plant from a waste water treatment facility in Thailand.

Customer: AEP/ Bangchak Petroleum Public Company Limited
Project:

38 MW solar power plant

Country/location: Thailand
Project description:

The project involves development of PDD for 38 MW solar power plant in Thailand and support until registration.

Customer: Confidential customer from Kenya
Project:

Power generation from wood waste

Country/location: Africa
Project description:

Feasibility study

Customer: Marshal Energy Resources, Bangladesh
Project:

2 MW rice husk fired power plant

Country/location: Bangladesh
Project description:

Pre-feasibility study for rice husk power generation

Customer: AEP/CAMCO
Project:

4 MW biogas power plant from ethanol waste water

Country/location: Thailand
Project description:

Assistance from PDD development until registration for a biogas power plant from a waste water treatment facility in Thailand.

Customer: Centre for Rural Technology, Nepal
Project:

Electricity generation from rice husk

Country/location: Nepal
Project description:

Pre-feasibility study

Customer: AEP/SAHASIN Cogeneration
Project:

8 MW wastewater treatment with biogas system in starch plant

Country/location: Chantaburi, Thailand
Project description:

Preparation of Project Design Document

Customer: For a multinational company’s African operation unit
Project:

10 MW wood waste power plant

Country/location: Africa
Project description:

Preparation of CDM project design document for power plant project

Customer: REVONERGY INC., UK based company
Project:

15 MW wood waste fired power plant

Country/location: Africa
Project description:

Specific activities involved in this project includes:

  • Preparation of full feasibility study
  • Tender document preparation (technical and commercial)
  • Preparation of project documents for loan purpose
  • Preparation of project information memorandum
Customer: UK based company
Project:

Preliminary market study

Country/location: Dubai, Sharjah and Abu Dhabi
Project description:

The project involves market assessment for the development of solar energy business

Customer: AEP/ Energy Absolute
Project:

45 MW wind power plant at Hua Sai

Country/location: Thailand
Project description:

Assistance from PDD development until registration for a wind power plant in Thailand.

Customer: 4 feasibility studies for various customers
Project:

Project advisory, Feasibility study

Country/location: Lao PDR
Project description:

The project involves conducting 4 biomass fired feasibility studies in Lao PDR at various locations

Customer: 10 feasibility studies for various customers
Project:

Project advisory, Feasibility study

Country/location: Philippines
Project description:

The project involves conducting 10 rice husk feasibility studies in Philippines at various locations

Customer: REVONERGY INC., UK based company
Project:

15 MW wood waste fired power plant

Country/location: Africa
Project description:

Preparation of CDM Project Design Document

Customer: Ban Heng Bee Rice Mill (1952) Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Pendang, Kedah Darul Aman, Malaysia
Project description:

This privately-owned rice mill is used both for milling and drying paddy operations. There are 56 dryers installed which were previously, running on heavy fuel oil. The availability of rice husks created the potential for the mill to run on a rice-husk fired boiler to supply the mill’s power and heating requirements. The cogeneration plant’s installed capacity is 450 kWe

Customer: REVONERGY INC., UK based company
Project:

5  MW rice husk fired power plant

Country/location: Africa
Project description:

Preparation of CDM Project Design Document

Customer: Heveafil Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Batang Kali, Selangor, Malaysia
Project description:

The installation involves the treatment of wastewater by anaerobic digestion and utilization of the biogas produced (7820 Nm³/day) as fuel for thermal oil heater in lieu of medium fuel oil

Customer: Kumpulan Guthrie Berhad
Project:

Advisory services, FSDP evaluation

Country/location: Kulim, Kedah, Malaysia
Project description:

This energy plant burns wood wastes to heat the thermal oil up to 280 °C. The heated oil is then used for heating the continuous press for pressing the fiber, for heating water in a boiler to generate 10 tons of steam/hour and for pre-heating the primary air used for the energy plant combustion chamber. The flue gas from the combustion chamber is cleansed in the dust cyclones and is then used for drying the fiber. The wood waste-fired boiler was supplied to a new mill for timber drying operation

Customer: Kilang Sawit Linggi Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Pontian, Johore, Malaysia
Project description:

This cogeneration plant was implemented to cover the power and heat requirements of palm oil mill using the wastes from the mill

Customer: Bekok Kiln Drying & Molding Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Gemas, Negeri Sembilan, Malaysia
Project description:

This wood waste-fired steam boiler produces steam for the heating of timber at the kiln drying plant. It was supplied with a wood dust extraction system from the wood molding plant and an automatic feeding system to the boiler

Customer: PT. Kurnia Musi Plywood Industries
Project:

Advisory services, FSDP evaluation

Country/location: Palembang, South Sumatra, Indonesia
Project description:

This installation involves a turnkey supply of a wood waste-fired boiler.  The steam is used for the process as well as to run an existing turbo-generator with a net output of 3.2 MWe.  The boiler replaces 2 old boilers, which are not able to provide sufficient steam for the turbine

Customer: Chia Meng Co. Ltd.
Project:

Advisory services, FSDP evaluation

Country/location: Nakorn Ratchasima, Thailand
Project description:

This cogeneration plant consists of a boiler supplying steam to a condensing turbine of capacity 2.5 MWe.  Flue gas and/or steam from the boiler can be used for paddy drying

Customer: Private company in Srilanka
Project:

4.8 MW hydro

Country/location: Sri Lanka
Project description:

PDD development for electricity generation from hydro power plant.

Customer: Areechai Wood Tech. Co. Ltd.
Project:

Advisory services, FSDP evaluation

Country/location: Srakaew, Thailand
Project description:

This wood processing company produces flooring (parquet) material. Large amounts of residues (sawdust, wood shavings, and slabs) are generated. Instead of being dumped or incinerated, sawdust and wood shavings are being sucked by a pneumatic collector system and are used as a source of energy in the boiler supplying steam to the kiln dryers

Customer: AEP/ Energy Absolute
Project:

45 MW wind power plant at Pak Phanang

Country/location: Thailand
Project description:

Assistance from PDD development until registration for a wind power plant in Thailand.

Customer: Laem Chabang Industry Co., Ltd.
Project:

Advisory services, FSDP evaluation

Country/location: Laem Chabang, Chonburi, Thailand
Project description:

This wood processing company manufactures top quality frames for export. The company decided to invest in a dust extraction and storage system and use their wood residues as a source of energy for kiln drying. The residues are being combusted in a hot water boiler with a total capacity of 400,000 kcal/hr

Customer: Sim Hoe Wood Industry Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Bentong, Pahang, Malaysia
Project description:

This cogeneration plant supplies all the electricity needed for the complete factory (sawmill and molding), as well as 4 tons of steam for the kiln drying operation

Customer: Homet Raya Sdn. Bhd.
Project:

Advisory services, FSDP evaluation

Country/location: Sarikei, Sarawak, Malaysia
Project description:

This 1.65 MWe wood waste-fired power plant consists of a boiler, supplying steam to a fully condensing turbine.  Power is supplied to the saw mill, while a part of the steam is used for kiln drying

Customer: AEP/Energy Absolute
Project:

90 MW solar power plant at Phitsanulok

Country/location: Thailand
Project description:

PDD development for electricity generation from solar power plant in Thailand.

Customer: AEP/PVD
Project:

Biogas power plants from starch plant waste water at PVD

Country/location: Thailand
Project description:

PDD development for waste water treatment from starch plant in Thailand.

Customer: AEP/K. S. Chanthaburi
Project:

Biogas power plants from starch plant waste water at Chanthaburi

Country/location: Thailand
Project description:

PDD development for waste water treatment from starch plant in Thailand.

Customer: Angkor Bio Cogen Co., Ltd.
Project:

Feasibility study

Country/location: Phnom Penh, Cambodia
Project description:

Angkor Bio Cogen intends to implement a 2.0 MWe cogeneration project in its rice milling facility at Cambodia that will utilize rice husk as the primary fuel. At present, the mill is using an on-site power generating unit which uses diesel as fuel. Initially, the electricity and steam generated will be used internally

Customer: ENVIMA
Project:

Biogas from POME

Country/location: Thailand
Project description:

The project involves development of PDD for biogas generation from palm oil mill effluent in Thailand.

Customer: Kumpulan Guthrie Sg Dingin Palm Oil Mill
Project:

FSDP evaluation, Performance monitoring

Country/location: Kedah, Malaysia
Project description:

Guthrie, a palm oil company, implemented this 2 MW cogeneration project to provide electricity and steam requirements solely for its palm oil factory

Customer: AEP/Energy Absolute
Project:

90 MW solar power plant at Nakornsawan

Country/location: Thailand
Project description:

PDD development for electricity generation from solar power plant in Thailand.

Customer: Titi Serong Edar Sdn Bhd
Project:

FSDP evaluation, Performance monitoring

Country/location: Perak, Malaysia
Project description:

Implemented at a rice mill, the 1.5 MW project generates steam and power to cater to the requirements of the rice mill

Customer: Bee Joo Industries, Pte. Ltd.
Project:

FSDP evaluation, Performance monitoring

Country/location: Singapore
Project description:

The 1 MW cogeneration plant uses wood chips from used pallets, building materials and furniture. The steam and electricity generated by the plant is supplied to the waste management operation of the company. Also, the heat recovered from the plant is used for various industrial waste processing operations of the company

Customer: ECO Special Waste Management Private Limited
Project:

FSDP evaluation, Performance monitoring

Country/location: Singapore
Project description:

This 1 MW cogeneration plant was designed and operated to cater to the steam and electricity requirements of the waste management operation of the plant using wood chips from tree trimmings and horticultural wastes

Customer: AEP/Sima1
Project:

Biogas power plants from starch plant waste water at Roi-et

Country/location: Thailand
Project description:

PDD Development for waste water treatment from a starch plant in Thailand.

Customer: REVONERGY INC., UK based company
Project:

30 MW MSW Power Plant

Country/location: Africa
Project description:

CDM potential assessment study

Customer: Rayong Municipality
Project:

FSDP evaluation, Performance monitoring

Country/location: Rayong, Thailand
Project description:

This project treats 25,550 tons municipal solid waste (MSW) per year through anaerobic digestion producing 5,800 tons of organic fertilizer and 5,100 MWh of electricity using a 600 kW gas engine system

Customer: Electrowatt-Ekono/Thai Power Supply
Project:

Project Advisory Services

Country/location: Chachoengsao, Thailand
Project description:

The principal aim of the study is to find out the problems associated with operation of the existing ESP in two 10.5 MW power plants and one 37 MW power plant (belonging to TPS group) and to prepare documentation for upgrading the power plant emission control systems

Customer: For a multinational company’s African operation unit
Project:

CDM afforestation project

Country/location: Africa
Project description:

Preparation of CDM project design document for an afforestation project and assistance in CER sales

Customer: Gulf Electric Public Co., Ltd.
Project:

Fuel availability study, Project advisory

Country/location: Trang Province, Thailand
Project description:

Gulf Electric PCL intends to put up a 20 MWe power project that will utilize wastes from rubber wood as the primary fuel. The project will produce electricity for sale to the grid

Customer: THS Bio-Energy Sdn. Bhd.
Project:

FSDP evaluation, Advisory services, Performance monitoring

Country/location: Sabah, Malaysia
Project description:

This 14 MWe cogeneration plant uses the oil palm empty fruit bunches (EFB), fibres and shells as fuel. It utilizes a boiler with a capacity of 80 ton/hour at 65 bar and 402°C live steam. The electricity generated is used in the palm oil process and the excess of up to 10MWe is exported to the grid. In addition, 25 tonnes of steam is produced and used for palm oil processing in the adjacent palm oil mill

Customer: Phu Khieo Bio-Energy Co., Ltd.
Project:

Feasibility study, Advisory services, FSDP Evaluation, Sourcing of funds, Performance monitoring

Country/location: Chaiyaphum, Thailand
Project description:

The project consists of a 41 MWe new high pressure system designed to provide the energy (steam and power) needs of UFIC, a sugar mill within the same group.  The project uses bagasse as fuel. Up to 29 MWe of electricity is sold to the grid

Customer: AEP/Energy Absolute
Project:

90 MW solar power plant at Lampang

Country/location: Thailand
Project description:

CDM PDD development for electricity generation from solar power plant in Thailand.

Customer: Dan Chang Bio-Energy Co., Ltd.
Project:

Feasibility study, Advisory services, Full scale demonstration project (FSDP) evaluation, Sourcing of funds, Performance monitoring

Country/location: Suphanburi,Thailand
Project description:

This is a Special Purpose Company created by the Mitr Phol Group to implement a new 41 MWe cogeneration plants using bagasse and other biomass as fuel. It consists of a new high pressure system generating electricity and steam for the needs of the Mitr Phol Sugar Mill. More than 25 MWe of excess power is sold to the national grid on a firm 21-year contract

Customer: A.T. Biopower Co. Ltd.
Project:

Review of Feasibility Study, Independent Engineer, Advisory Services

Country/location: Central Thailand
Project description:

The project consists of a power plant of about 20 MWe using rice husk as fuel. The electricity generated is sold to the grid as an SPP

Customer: CEPALCO
Project:

8 MW Cabulig River Mini-Hydroelectric Power Project

Country/location: Philippines
Project description:

Development of monitoring plan, preparation of monitoring report and facilitation for CER sales.

Customer: Patum Rice Mill and Granary Public Co. Ltd
Project:

Feasibility study, Engineering & Tendering of EPC contract, Project advisory

Country/location: Pathumthani, Thailand
Project description:

The rice mill had an existing 2.4 MWe cogeneration plant which supplied part of the mill’s energy requirements. This cogeneration plant was upgraded by replacing the turbo-generator to about 10 MWe capacity. Excess power from the plant is sold to the grid within the Small Power Producer (SPP) scheme of Thailand

Customer: Canada based private company
Project:

32 MW electricity generation project in Europe

Country/location: Europe
Project description:

ERU estimation and advice on ERU sales for a 32 MW electricity generation project

Note: The above list is only the selected projects of Renewable Cogen Asia and its Directors. For complete list of projects, please contact us